Author Topic: Firmware for Bush LC-39GL12F ? Anyone good at Russian?  (Read 649 times)

0 Members and 1 Guest are viewing this topic.

cheeky2

  • Sr. Member
  • ****
  • Posts: 154
Firmware for Bush LC-39GL12F ? Anyone good at Russian?
« on: November 08, 2016,08:01:09 »
Ok have a Bush LC-39GL12F 39inch TV led set with corrupted spi flash ic.
Bush LC-39GL12F Chassis (Main Board): T.MSD306.68A 12023
 Have found this Russian site here with it

http://remont-aud.net/dump/lcd_pdp_tv/prochee/bush_lc_39gl12f_shassi_main_board_t_msd306_68a_12023/248-1-0-33098

or web translation here

https://translate.google.co.uk/translate?hl=en&sl=ru&u=http://remont-aud.net/dump/lcd_pdp_tv/prochee/bush_lc_39gl12f_shassi_main_board_t_msd306_68a_12023/248-1-0-33098&prev=search

However I cannot register as my keyboard not Russian obviously!

So if anyone has access to this site that can download it that would be great.
Thanks

Mulja tv repair portal

Firmware for Bush LC-39GL12F ? Anyone good at Russian?
« on: November 08, 2016,08:01:09 »

jordan

  • Hero Member
  • *****
  • Posts: 785
Re: Firmware for Bush LC-39GL12F ? Anyone good at Russian?
« Reply #1 on: November 08, 2016,12:09:03 »
T.MSD306.68A 12023
Greeting from Slovenia
Jordan Čebron

cheeky2

  • Sr. Member
  • ****
  • Posts: 154
Re: Firmware for Bush LC-39GL12F ? Anyone good at Russian?
« Reply #2 on: November 08, 2016,12:31:32 »
Brilliant thanks Jordan  :c017:
 Just about to remove the spi flash from the board and give it a go :)
I will let you know how it goes.

Mulja tv repair portal

Re: Firmware for Bush LC-39GL12F ? Anyone good at Russian?
« Reply #2 on: November 08, 2016,12:31:32 »

cheeky2

  • Sr. Member
  • ****
  • Posts: 154
Re: Firmware for Bush LC-39GL12F ? Anyone good at Russian?
« Reply #3 on: November 08, 2016,15:07:04 »
Unfortunately wrong firmware for the TV as buttons, remote control and screen is out. Good thing is at least the TV now powers up and displays. So definitely the correct firmware is needed. I may have another attempt at registering at the russian site!

jordan

  • Hero Member
  • *****
  • Posts: 785
Re: Firmware for Bush LC-39GL12F ? Anyone good at Russian?
« Reply #4 on: November 09, 2016,02:25:12 »
I am waiting for a response from my friends who have registered on the web
Greeting from Slovenia
Jordan Čebron

cheeky2

  • Sr. Member
  • ****
  • Posts: 154
Re: Firmware for Bush LC-39GL12F ? Anyone good at Russian?
« Reply #5 on: November 09, 2016,04:09:44 »
I had a few attempts at registering however it didn't seem to go through!
 Let's hope your friends have better luck.
 I watch this space.
 The site looks to have a huge amount of information if you do manage to get registered.
 Thanks  :c017:

Mulja tv repair portal

Re: Firmware for Bush LC-39GL12F ? Anyone good at Russian?
« Reply #5 on: November 09, 2016,04:09:44 »

jordan

  • Hero Member
  • *****
  • Posts: 785
Re: Firmware for Bush LC-39GL12F ? Anyone good at Russian?
« Reply #6 on: November 09, 2016,09:15:07 »
I hope that will be fine
Greeting from Slovenia
Jordan Čebron

cheeky2

  • Sr. Member
  • ****
  • Posts: 154
Re: Firmware for Bush LC-39GL12F ? Anyone good at Russian?
« Reply #7 on: February 28, 2017,06:56:19 »
Checked the above binary out but unfortunately its not suitable. I don't even think its from a TV!
 Ordered it online, which resolved TV issues. TV now been sold :)
 Thanks for looking :)

mend it

  • Newbie
  • *
  • Posts: 7
Re: Firmware for Bush LC-39GL12F ? Anyone good at Russian?
« Reply #8 on: July 08, 2017,03:31:55 »
where did you order it from as I now need cheers


mend it

  • Newbie
  • *
  • Posts: 7
Re: Firmware for Bush LC-39GL12F ? Anyone good at Russian?
« Reply #10 on: July 11, 2017,03:40:26 »
cheers

 

Powered by EzPortal