Author Topic: Panasonic TX-L37ETS51  (Read 358 times)

0 Members and 1 Guest are viewing this topic.

thoma

  • Sr. Member
  • ****
  • Posts: 128
    • Email
Panasonic TX-L37ETS51
« on: June 19, 2017,09:39:59 »
Hello to all!
Have Panasonic TX-L37ETS51 LA35 Chassis with PSU TNPA 5583
The set is dead no std by led you can not switch on the Voltages from PSU are available!
need schematic and tips!A-Board defective?
regards thoma!

Mulja tv repair portal

Panasonic TX-L37ETS51
« on: June 19, 2017,09:39:59 »

downunder

  • Hero Member
  • *****
  • Posts: 808
Re: Panasonic TX-L37ETS51
« Reply #1 on: June 20, 2017,03:07:14 »

Hi thoma,

The standby LED is controlled by the A board. If you're happy that the power supply is OK, then it'll be the A board faulty.

Bruce

thoma

  • Sr. Member
  • ****
  • Posts: 128
    • Email
Re: Panasonic TX-L37ETS51
« Reply #2 on: June 20, 2017,08:12:56 »
thank you!Change the A Board too expensive!mistake repairable on A Board?
regards thoma!

Mulja tv repair portal

Re: Panasonic TX-L37ETS51
« Reply #2 on: June 20, 2017,08:12:56 »

downunder

  • Hero Member
  • *****
  • Posts: 808
Re: Panasonic TX-L37ETS51
« Reply #3 on: June 21, 2017,03:11:14 »

Not a service-friendly board. Never had any luck in repairing one and have no idea what would be causing the problem.

Bruce

 

Powered by EzPortal