Author Topic: SHARP LC-32CHE5111E  (Read 210 times)

0 Members and 1 Guest are viewing this topic.

jose almeida tavares

  • Full Member
  • ***
  • Posts: 65
    • Email
SHARP LC-32CHE5111E
« on: July 13, 2017,12:47:34 »
Hello, this tv on, displayed sharp logo  and hdmi and revert to stby. i need help please.

Mulja tv repair portal

SHARP LC-32CHE5111E
« on: July 13, 2017,12:47:34 »

downunder

  • Hero Member
  • *****
  • Posts: 793
Re: SHARP LC-32CHE5111E
« Reply #1 on: July 14, 2017,06:59:14 »

Most likely an error induced by faulty backlight LEDs. If you put it into service mode, it will over-ride backlight protection, most likely you'll get the service menu which indicate cause of shutdown. Check the Lamp Error count, it should be "0". When it reaches "5" it will prevent the set from turning on. Reset it
to "0" and the set should function again, but you'll need to find the cause of the backlight failures.              Bruce

jose almeida tavares

  • Full Member
  • ***
  • Posts: 65
    • Email
Re: SHARP LC-32CHE5111E
« Reply #2 on: July 14, 2017,12:37:09 »
Hello. O tv fica a apresentar hdmi durante algum tempo e depois desliga. Esse o problema.

Mulja tv repair portal

Re: SHARP LC-32CHE5111E
« Reply #2 on: July 14, 2017,12:37:09 »

downunder

  • Hero Member
  • *****
  • Posts: 793
Re: SHARP LC-32CHE5111E
« Reply #3 on: July 15, 2017,02:52:19 »

Non comprende !

jose almeida tavares

  • Full Member
  • ***
  • Posts: 65
    • Email
Re: SHARP LC-32CHE5111E
« Reply #4 on: July 15, 2017,07:36:06 »
Perdon. Escribo en portugues. hable que el tv enciende apresenta el logo de sharp e solamente fica en entradas hdmi e despues se apaga. salud.

jose almeida tavares

  • Full Member
  • ***
  • Posts: 65
    • Email
Re: SHARP LC-32CHE5111E
« Reply #5 on: July 21, 2017,11:46:59 »
Hello, i need the firmware. thanks.

Mulja tv repair portal

Re: SHARP LC-32CHE5111E
« Reply #5 on: July 21, 2017,11:46:59 »

 

Powered by EzPortal
download